Well Oriented ZnO Nanorods Array: Negative Resistance and Optical Switching

Well‐oriented ZnO nanorods (NRs) arrays were grown on Si, alumina, quartz, and FTO substrates through a ZnO seed layer followed by low temperature wet chemical process. The influence of sputtered ZnO seed layer thickness (100, 50, 32, and 16 nm), annealing temperature and CuO_x coverage on the characteristics of ZnO NRs were investigated in this study. The crystalline structural, chemical, morphological, optical, and electrical properties of ZnO NRs arrays were studied by X‐ray diffraction (XRD), field emission‐ scanning electron microscopy equipped by energy dispersive X‐ray spectroscopy (FE‐SEM/EDX), Raman scattering, UV/Vis ‐ near IR absorption spectroscopy and current‐voltage characteristic. XRD and Raman spectra measurement revealed that the synthesize ZnO displayed hexagonal wurtzite structure. The individual rod diameter, density, and orientation can be controlled by varying the seed layer thickness. The mean diameter and maximum length of ZnO NRs are around 55–66 nm and 282 nm, respectively. ZnO NRs/ ZnO thin film structure shows optical switching and negative differential resistance behavior as applicable to ON/OFF gate and memory devices.     

Microstructure of nickel nanoparticles embedded in carbon films: case study on annealing effect by micromorphology analysis

The presented study is aimed at analyzing the surface texture of amorphous hydrogenated carbon layers containing nickel nanoparticles (Ni‐NPs@a‐C:H) within their structure, which were deposited by Radio Frequency (RF) sputtering and RF‐Plasma Enhanced Chemical Vapor Deposition (RF‐PECVD) methods on glass substrates. Prepared films were then used as research material following their annealing at two different temperatures of 250 °C and 350 °C in an inert argon atmosphere. Series of height samples were taken with the help of atomic force microscopy (AFM) operating in a non‐contact mode and examined in order to determine their fractal characteristics. Raw AFM data were first plane‐fitted to remove the surface bow exhibiting the so‐called residual surface, and then numerically processed to calculate the Areal Autocorrelation Function (AACF), which was later used to compute the Structure Function (SF). The log–log plots of the latter served for calculation of fractal properties of surfaces under investigation, including fractal dimension D, and pseudo‐topothesy K. The analysis of 3‐D surface texture helps to understand their essential characteristics and their implications as well as graphical models and their implementation in computer simulation. Copyright © 2016 John Wiley & Sons, Ltd.     

Multispectroscopic DNA interaction studies of a water-soluble nickel(II) complex containing different dinitrogen aromatic ligands

The water-soluble Ni(II) complex, [Ni(bipy)₂(phen-dione)](OAc)₂·2H₂O (bipy = 2,2′-bipyridine and phen-dione = 1,10-phenanthroline-5,6-dione) has been synthesized and characterized by physico-chemical and spectroscopic methods. The binding interactions of this complex with calf thymus DNA (CT-DNA) were investigated using fluorimetry, spectrophotometry, circular dichroism and viscosimetry. In fluorimetric studies, the enthalpy and entropy of the reaction between the complex and CT-DNA showed that the reaction is exothermic (ΔH = −123.9 kJ mol⁻¹; ΔS = −323.5 J mol⁻¹ K⁻¹). The competitive binding studies showed that the complex could not release methylene blue completely. The complex showed absorption hyperchromism in its UV–Vis spectrum with DNA. The calculated binding constant, K _b obtained from UV–Vis absorption studies was 2 × 10⁵ M⁻¹. Moreover, the complex induced detectable changes in the CD spectrum of CT-DNA, as well as changes in its viscosity. The results suggest that this nickel(II) complex interact with CT-DNA via a groove-binding mode.     

Synthesis of Novel Polycyclic Indole‐Annulated Thiopyranocoumarin Derivatives via Domino Knoevenagel–Hetero‐Diels–Alder Reaction in Aqueous Media

An efficient synthesis of polycyclic indole derivatives is achieved via domino Knoevenagel–hetero‐Diels–Alder reaction of O‐acrylated salicylaldehyde derivatives with dihydroindole‐2‐thiones in H₂O as solvent. The products are formed in good‐to‐excellent yields with high regio‐ and stereoselectivity.     

A new and convenient approach to heterotetracyclic benzoxazocines through addition of 1,3-dicarbonyl compounds to quinolinium salts

The synthesis of a series of benzoxazocines has been achieved in good yields by tandem C-alkylation and intramolecular O-alkylation of 1,3-dicarbonyl compounds with quinolinium salts. This is a novel example of the synthesis of eight-membered rings via a tandem process, which provides a method for the synthesis of medium-ring heterocycles.     

Highly efficient, one-pot, solvent-free synthesis of 2,4,6-triarylpyridines using a Br?nsted-acidic ionic liquid as reusable catalyst

Abstract  

A simple, efficient, and green method for synthesis of 2,4,6-triarylpyridines by one-pot three-component reaction of acetophenones, aryl aldehydes, and ammonium acetate using 3-methyl-1-(4-sulfonylbutyl)imidazolium hydrogen sulfate [HO₃S(CH₂)₄MIM][HSO₄], a Br?nsted-acidic ionic liquid, as an effective and reusable catalyst under solvent-free conditions is described. This method has several advantages, for example simple procedure with an easy work-up, shorter reaction times, and high yields.     

Biotransformation of some monoterpenoid ketones by <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> MCCS 012

Biotransformation of several monoterpene ketones, including carvone, pulegone, piperitone, menthone, and fenchone, was carried out by the locally isolated unicellular microalgae Chlorella vulgaris. The microalgal strain was isolated during a screening program from soil samples collected from paddy-fields of Fars Province, in the south of Iran. Chlorella vulgaris was cultured in 250 mL conical flasks, each containing 50 mL of BG-11 liquid medium and 20 μL levels of terpene substrates, incubated at a temperature of 28±2°C and illuminated continuously with fluorescent lamps with shaking at 80 rpm. The metabolites were identified by thin-layer chromatography and GC-MS. Chlorella vulgaris has the ability to reduce the C=C double bond of carvone to yield trans-dihydrocarvone and cis-dihydrocarvone. The cell line reduced menthone and pulegone to the same product and gave menthol. Study of Chlorella vulgaris with substrates of piperitone and fenchone showed no reaction in these substrates. Chlorella vulgaris MCCS 012 was assigned according to the 18S rRNA gene sequence. The DNA sequence of the 18S rRNA gene of Chlorella vulgaris MCCS 012 was recorded in the NCBI under the accession number EU374170.     

Matrix-free analysis of aflatoxins in pistachio nuts using parallel factor modeling of liquid chromatography diode-array detection data

In the present study a second-order calibration strategy for high performance liquid chromatography with diode-array detection (HPLC-DAD) has been developed using parallel factor analysis (PARAFAC) and has been applied for simultaneous determination of aflatoxins B₁, B₂, G₁ and G₂ in pistachio nuts in the presence of matrix interferences. Sample preparation was based on solvent extraction (SE) followed by solid phase extraction (SPE) on Bond Elut C18 cartridges. Since the sample preparation procedure was not selective to the analytes of interest, exploiting second-order advantage to obtain concentrations of individual analytes in the presence of uncalibrated interfering compounds seemed necessary. Appropriate pre-processing steps have been applied to correct background signals and the effect of retention time shifts. Transferred calibration data set obtained from standardization of solvent based calibration data has been used in prediction step. The results of PARAFAC on a set of spiked and naturally contaminated pistachio nuts indicated that the four aflatoxins could be successfully determined. The method was validated and multivariate analytical figures of merit were calculated. The advantages of the proposed method are using a low-cost SPE step relative to standard method of aflatoxin analysis (immune affinity column assay), a unique and simple isocratic elution program for all samples and a calibration transfer for saving both chemicals and time of analysis. This study show that coupling of SPE-HPLC-DAD with PARAFAC as a powerful second-order calibration method can be considered as an alternative method for resolution and quantification of aflatoxins in the presence of unknown interferences obtained through analysis of highly complex matrix of pistachio samples and cost per analysis can be reduced significantly.     

Sorted cell microarrays as platforms for high-content informational bioassays

We report on surface-engineered microarrays that provide in situ cell sorting, localization, and immobilization of various subsets of human primary lymphocytes, followed by an on-chip bioassay for ionizing-radiation-induced cytogenetic damage. The microarray format eliminates the necessity of separating cell sub-populations by alternative means (such as fluorescence- or magnetic-activated cell sorting) prior to performing informational bioassays. To exemplify the potential of this on-chip cytometry approach, we have integrated the cytokinesis-block micronucleus cytome (CBMNcyt) assay with the microarray platform for analysis of the chromosome damage profile of specific subsets of human peripheral lymphocytes. Microarray results were compared with data obtained from the traditional CBMNcyt assay on heterogeneous lymphocyte populations, and with flow cytometry data. Our results suggest that cytogenetic damage caused by ionizing radiation is not uniformly distributed across all lymphocytes subsets, but rather concentrated in specific subsets. The salient features of our approach are that it requires very small volumes of reagents, allows sorting of lymphocyte subsets in situ, increases parallelism of cell assays and is amenable to high content microscopy analysis. The on-chip cytometry format opens new vistas for advanced cell-based assays, potentially bringing to light important information which remains hidden with conventional assays and hence engendering new discoveries in cell biology.     

Fiber optic-linear array detection spectrophotometry in combination with dispersive liquid-liquid microextraction for preconcentration and determination of copper

In this research, simple, rapid and efficient method, dispersive liquid-liquid microextraction (DLLME) combined fiber optic -linear array detection spectrophotometry (FO-LADS) was developed using a cylindrical micro-cell for preconcentration and determination of Cu(II) in samples. DLLME and FO-LADS methods have good matching conditions for being combined since FO-LADS is a suitable method for the determination of analytes in low volume of the remained phase obtained after DLLME. Molar absorptivity of complex Cu with (4-benzylp iperidineditiocarbamate potassium salt) (BPDC) was determined as 2.75 × 10⁴ L mol^-1 cm^-1 at 7nmax = 436 nm. Under the optimum conditions the calibration graph was linear in the rage of 2–70 fug L^-1 with detection limit of 0.34 fug L^-1. The proposed procedure was successfully applied to the determination of Cu(II) in real water samples and human urine sample.